Is It True That if You’re Thirsty, You’ve Already Waited Too Long To Drink Water?

In short, unless you have a medical condition, the answer is yes.

I spent the entire elevator ride to Shafer Clinic in Manhattan considering chickening out of the Fraxel treatment that was waiting for me on the 33rd floor.

Though the do-it-all laser has long been regarded as the gold standard of skin care, it has a reputation for requiring some serious downtime, and I wasn’t sure I had the guts to go through with it. But with the benefits from a single treatment in the back of my brain—a reduction of fine lines, improved skin texture, sun damage repair, acne scar reduction, skin resurfacing, a boost in skin firmness, and the list goes on and on (and on)—I decided to see it through.

Although my initial apprehensions about the Fraxel treatment turned out to be largely unfounded, I did require a significant amount of downtime to see the glowy bounce that has long been oohed and ahhed about by those in the know. To ensure you reap all the benefits while avoiding any pitfalls, I’m sharing my comprehensive take on the procedure in this “first timers” guide.

Understanding the Fraxel Technology

“Fractionated lasers, [which are used for Fraxel treatments], work by directing microscopic laser columns at the skin, creating tiny injuries in certain parts of the skin barrier while leaving other zones of healthy surrounding tissue untouched,” says Dendy Engelman, MD, FACMS, FAAD, board-certified cosmetic dermatologist and Mohs surgeon. “These microscopic injuries trigger the skin’s natural reparative processes.” In turn, this leads to that long list of benefits.

Within this set of lasers, there are two main types: Ablative lasers, which vaporize the top layer of the skin, effectively treating more severe concerns—like deeper wrinkles and sagging—but require longer recovery; and non-ablative lasers, which focus on the underlying layers of the skin for milder concerns—like photo-aging, fine lines, and hyperpigmentation—with minimal downtime.

By contrast, non-fractionated lasers, like CO2 lasers, “act on every part of the target area,” says Dr. Engelman. This means that while you’ll likely see more robust results from these treatments, they can come with up to two weeks of downtime.

On the spectrum from “lunchtime lasers” like IPL (intense pulsed light treatments, which use a broad spectrum of light and are gentler) to the types of treatments that leave your skin crackling up like you’re tonight’s dinner, Fraxel serves as a nice in-between—a five-day downtime that will leave your skin looking fresh and new.

Wait, is there more than one Fraxel laser?

Yes. Now that you’re well acquainted with the types of technology behind these lasers (fractionated versus unfractionated; ablative versus non-ablative), we can go deeper. Fraxel is a brand name for a class of fractionated lasers; the same way Botox is a brand name of a neuromodulator that freezes your muscle. There are a bunch of different fractionated lasers, but the ones you want to become most familiar with are:

Fraxel Re:Pair

This laser is an ablative, CO2 laser, which means it will “vaporize” the top and deeper skin layers to stimulate your body’s wound-repair triggers. It results in prominent collagen creation for those with sagging and deeper wrinkles, but the downtime is no joke and can last up to two weeks. Also, because you’re wounding the top layer of skin, there’s a potential for hyperpigmentation, so you should make sure to speak with your dermatologist about the potential risks and benefits of opting for this treatment. It’s important to note that more intense lasers don’t often mean “better” results. You need to match what you’re looking for with what a laser does.

Fraxel: Dual

The latest Fraxel models—like the Fraxel Dual—are non-ablative and fractionated, and deliver heavyweight results without having to cancel weeks’ worth of social plans.  The Fraxel Dual uses two wavelengths—1,550 nanometers (nm) and 1,927 nm—which gives it the power to work on multiple skin layers.

“Harnessing the power of two different wavelengths allows Fraxel to target different layers of the skin barrier,” says Dr. Engelman. “The 1927 nm wavelength acts on the epidermis, or the outer layer of skin, while the 1550 nm wavelength acts on deeper layers of the dermis as well as the epidermis.”

Studies have shown that the 1927 nm wavelength is beneficial for removing hyperpigmentation, while the 1550 nm wavelength helps improve fine lines as well as scarring. In other words, as the name suggests, it’s “dual” acting in that it gives you both topical and collagen-boosting results.

Lumenis Resurfx

Outside of the Fraxel brand name, this laser operates at a 1565 nm wavelength, giving comparable results to Fraxel Re:Store, a non-ablative, single-wavelength laser. It only requires a single pass over the skin, and it has a cooling tip so that it feels more comfortable as you’re treating each area. It was the laser that I tried at Dr. Engelman’s office.

Nd: Yag

The Nd: Yag is a Q-switch laser—meaning it delivers high-intensity pulses for short amounts of time—that operates at a 1064 nm frequency. It’s a non-ablative, fractionated laser that’s able to be used on darker skin tones for a wide range of benefits, including skin rejuvenation, acne scarring, and more.

One note on how lasers work: they often use light to seek out melanin in the skin, and melanin-rich skin can absorb that heat, leading to potential scarring and hyperpigmentation. “As in nearly every industry, technological advancements have emerged in recent years to improve equipment and techniques, resulting in more efficient lasers,” says Dr. Engelman. “One great advancement is the Nd: YAG laser, which—unlike many lasers—can safely be used on deeper skin tones.”

What are the main benefits of Fraxel

1. Increased Collagen Production

You know the bouncy kind of skin that celebrities chalk up to “drinking a lot of water” or “getting a good night’s sleep”? Yeah, this is what they’re actually doing. “Collagen can be likened to skin’s ‘scaffolding,’ and gives skin a more youthful appearance,” says Dr. Engelman. “The regeneration of collagen post-Fraxel makes the skin appear firmer, plumper, and more youthful overall.”

2. Improved Cell Turnover

If your skin texture is looking a little meh, you might just need to speed up the turnover of some of your cells to get rid of the dead ones and show off the glorious, glowy ones sitting just beneath the surface. “The result is brighter, fresher skin and more even texture and tone,” says Dr. Engelman.

3. Reduction in Hyperpigmentation

“Deep laser penetration into the skin barrier is effective for breaking up scar tissue and allowing the skin to regenerate healthily, resulting in improved texture,” says Dr. Engelman. “Shallow penetration into the epidermis breaks up excess melanin and replaces dyspigmented areas with a more even skin tone.” This results in a more even-toned complexion that’s free of melasma or other hyperpigmented spots.

Who Fraxel is right for

If you’re interested in laser resurfacing, you need to consider your lifestyle along with your individual skin concerns. “Like all lasers, Fraxel is not good for people who have an outdoor lifestyle where they cannot avoid sun exposure post-procedure,” says Loretta Ciraldo, MD, a dermatologist and founder of Dr. Loretta Skincare.

She adds that if you have a consultation for a laser, remember to ask a lot of questions of your specific provider for the best results. “Keep in mind that there are now many fractionated lasers and the settings may be adjusted to the person’s tone,” she says. “It is of the utmost importance that you ask many questions before you have laser treatment so you can make a very informed decision on if you should be lasered and which laser is best for your skin.”

Inquire about things like downtime, how many treatments you’ll need to achieve the results you’re after, and which laser will work best for your particular skin type, tone, and concerns.

What a Fraxel session is like

A Fraxel appointment always starts with pre-treatment numbing. The technician will apply a numbing gel all over your face (inevitably, I always get this in my mouth and feel like I’ve undergone dental work; don’t make my mistakes and lick your lips!), and after 30 minutes to an hour, you’re ready to go.

After the laser flicks on, you can definitely feel it working—it reminded me of a fairly aggressive rubber band snapping on my skin every time it pulsed. The laser head is about the size of a nickel, and so it takes repeated triggers to cover the entire area. I didn’t think I would need the cushion-y stress ball that the technician offered me to distract me from the discomfort, but after one-half of my face was treated, I changed my tune. Though there is some (manageable) pain involved, the tip of the laser has a cooling head that helps your skin from feeling too hot—you won’t get the same singed hair-and-skin smell you get with IPL and other types of lasers.

All in all, the procedure takes 20 minutes (on top of the 30 minutes to an hour of numbing) and is followed by 10-ish minutes of icing to reduce the swelling before you’re on your way.

What the recovery is like

Right after:

Days 1 and 2:

“Your skin will most likely feel and look swollen, red, and hot—similar to a sunburn,” says Dr. Engelman. “It’s crucial to stay hydrated and out of the sun, and to regularly apply a cold compress as this is when your skin is at its most fragile state.”

I was actually much more swollen than I’ve ever been with a sunburn, and would instead say that the first day I looked like any one of the Mrs. Doubtfire personas. My face was not my own, but I diligently slathered on the SkinCeuticals HydraBalm ($25) and took an antihistamine, which are regarded to help with swelling. 

A lot of people probably wouldn’t have left the house, but I threw caution to the wind and met a friend for coffee and picked up another friend’s marathon bib with her. I feel like we can start to normalize everyone not looking their best every second of every day, no?

Days 3 and 4

On about day three, right on the clock, the swelling started to subside. “This is when you can slowly start to integrate skin-care products recommended by your provider,” says Dr. Engelman. “Most of these products will focus on hydration, nourishment, and reparation.”

“Fraxel laser boosts collagen production in the skin while vitamin C is known for its role in collagen synthesis, so using it in conjunction may enhance the overall collagen-stimulating effects,” says Dr. Engelman. “Vitamin C is also an essential antioxidant that protects the ski

Recommended Story For You :

The alpine secret for healthy weight loss

The Most Potent Fast-Acting Formula For Incinerating Stubborn Fat

Real Cortexi Users Real Life‑Changing Results

This Cold Drink Might Trigger Your Prostate

Red Boost is a powerful new formula for boosting male sexual health.

Everything you eat or drink eventually reaches your liver for processing.

Brand New Probiotics Specially Designed For The Health Of Your Teeth And Gums

Empowering You to Take Control of Your Blood Sugar Health!

Scientists Finally Discover the Root Cause of Belly Fat and Unexplained Weight Gain

Oils Fight Fungus Resistance And Support Healthy Nails And Skin